PCE Repair Services India
PCE Instruments is a German manufacturer of precision measurement, testing, and monitoring equipment serving industrial, environmental, and laboratory applications globally. Founded in 1999, PCE specializes in portable and stationary meters including sound level meters, temperature data loggers, power analysers, and environmental monitoring systems. Their products are trusted across Indian pharmaceutical, food processing, automotive, and chemical manufacturing sectors for compliance, quality assurance, and preventive maintenance.
PCE Instruments is a German manufacturer of precision measurement, testing, and monitoring equipment serving industrial, environmental, and laboratory applications globally. Founded in 1999, PCE specializes in portable and stationary meters including sound level meters, temperature data loggers, power analysers, and environmental monitoring systems. Their products are trusted across Indian pharmaceutical, food processing, automotive, and chemical manufacturing sectors for compliance, quality assurance, and preventive maintenance.
Synchronics repairs the full range of PCE measurement and testing instruments including data loggers, handheld meters, environmental monitors, and industrial sensors. Our 180+ engineers have extensive experience restoring PCE equipment to original specifications, with rapid turnaround for calibration-critical devices. Indian manufacturers rely on Synchronics for PCE repairs because we understand the precision demands of ISO-certified production facilities and regulatory compliance requirements unique to Indian industry.
Expert PCE instrument repair and recalibration for Indian manufacturing compliance.
PCE Equipment We Repair — By Category
PCE Product Lines We Repair
Our engineers are trained on the full PCE product range. Below are the major product families we service.
PCE Data Logger Series
Wireless and wired environmental data loggers for temperature, humidity, pressure, and multi-parameter monitoring. Common failures include battery management faults, wireless module dropout, and sensor calibration drift requiring recalibration to factory standards.
PCE Sound Level Meter Range
Portable and field sound analysers for industrial noise monitoring and occupational safety compliance. Typical repairs include microphone sensitivity loss, display malfunction, battery circuit failures, and frequency response calibration issues.
PCE Power Quality Analysers
Three-phase and single-phase power analysers for energy audits and harmonic distortion measurement in Indian manufacturing plants. Common faults include voltage input module failure, data storage corruption, and calibration drift in current transformer circuits.
PCE Environmental Monitors
Fixed and portable environmental monitoring systems for air quality, particulate measurement, and emissions compliance in Indian industrial facilities. Repair challenges include sensor fouling, analog-to-digital conversion errors, and wireless transmission failures.
PCE Thermography and Thermal Cameras
Infrared thermal imaging cameras for predictive maintenance and electrical fault detection in high-voltage switchgear and motor installations. Common issues include detector array malfunction, thermal compensation circuit failure, and lens optical degradation.
Why Choose Synchronics for PCE Repairs?
PCB-Level Expertise
We repair down to the component level — not just swap boards. Our engineers identify root causes, replace failed IGBTs, capacitors, processors, and gate drivers on PCE equipment.
Fast Turnaround
Standard 7–10 working days. Express 3–5 days available for critical breakdowns. Emergency same-day/next-day service for unplanned downtime.
6-Month Warranty
Every repaired unit ships with a 6-month comprehensive warranty on parts and labour. Our repair success rate is over 94% across all brands.
All-India Service
Couriered repairs accepted from any city in India. Doorstep pickup available in Vadodara, Mumbai, Pune, Ahmedabad, Surat, Chennai, and more.
Common PCE Equipment Faults We Fix
Based on 30+ years of repair data, these are the most frequent failure modes we see in PCE equipment arriving at our workshop.
- ✓PCE data logger wireless module no signal — The 2.4 GHz RF module in wireless PCE loggers (PCE-LOGGER-WL, PCE-THD 50) fails due to antenna connector corrosion, soldered joint micro-fractures from thermal cycling, or firmware upload failures during maintenance. This is critical for Indian pharma cold-chain facilities requiring real-time monitoring.
- ✓PCE sound meter calibration drift above tolerance — Microphone diaphragm degradation from humidity ingress, acoustic port obstruction, or ageing of the internal preamplifier circuits in PCE-3113/3114 models causes frequency response errors and sound pressure level reading inaccuracy beyond ±2 dB specification required for occupational safety audits.
- ✓PCE power analyser no voltage display on phase input — The input voltage conditioning circuit (analog pre-filter and attenuation network) fails due to capacitor dielectric breakdown, op-amp saturation, or broken protective MOV surge suppressors. This is common in Indian plants with poor power quality and harmonic-rich loads.
- ✓PCE environmental monitor data storage corruption — Flash memory wear-out, abrupt power loss during file write operations, or corrupted file system allocation table in PCE-RCM series monitors. Occurs in plants with unreliable generator backup or frequent brownouts typical of some Indian industrial zones.
- ✓PCE thermal camera detector dead pixels — Microbolometer focal plane array degradation, bad solder connections on detector substrate, or thermal cycling stress in uncooled CMOS detectors used in PCE-TC 3/5 models. Common in Indian steel mills, foundries, and power plants with extreme temperature fluctuations.
- ✓PCE data logger battery management fault no charging — Charging circuit failure in PCE-THD 50/110 rechargeable models due to failed lithium charging IC, battery cell internal resistance increase, or corroded charge connector. Lithium cells in tropical Indian warehouses degrade faster than temperate climates.
How We Repair Your PCE Unit
Receive & Log
Your unit is logged into our tracking system with a unique job number. You receive WhatsApp / email updates at every stage.
Fault Diagnosis
Board-level diagnosis using oscilloscopes, LCR meters, and thermal cameras. Root cause identified before any repair begins.
Component Repair
Faulty ICs, capacitors, MOSFETs, IGBTs, and gate drivers replaced with genuine or equivalent-spec components.
Full-Load Test
Unit tested under rated load with original or equivalent motor. All parameters verified. 6-month warranty issued.
Industries Using PCE Equipment
We serve plant maintenance teams across all major industries where PCE automation is deployed.
Frequently Asked Questions — PCE Repairs
Do you repair PCE equipment anywhere in India?+
Yes. Synchronics repairs the full PCE product range — data loggers, sound level metres, power analysers, environmental monitors, and thermal imaging cameras. We offer PAN India door pickup from Mumbai, Delhi, Pune, Chennai, Hyderabad, Ahmedabad, Bangalore, Kolkata, and all other major cities. Equipment is repaired at our 22,000 sq ft facility in Vadodara, Gujarat, with average turnaround of 7-10 working days.
Can Synchronics recalibrate PCE measurement instruments to Indian standards?+
Yes, absolutely. PCE measurement equipment must maintain calibration accuracy for ISO 9001, ISO 14001, and occupational health compliance audits in India. Synchronics provides NABET-accredited calibration certificates for sound level metres (IEC 61672-1), temperature data loggers, and electrical parameters using traceable reference standards. We document calibration against Indian Standard IS codes where applicable.
What is the typical repair cost for a PCE data logger wireless module failure?+
PCE wireless module replacement (parts + labour) typically ranges 8,000 - 15,000 rupees depending on model and module type. Firmware reflashing is included at no extra charge. We provide free diagnostic assessment via remote video call to confirm the exact fault before quoting. Request a quote using your model number and fault description via email or phone.
Do you stock PCE spare parts or do I need to source them myself?+
Synchronics maintains a stock of common PCE replacement modules including microphone capsules, charging circuits, RF modules, and sensor assemblies. For rare or newer PCE models, we source parts directly from PCE Instruments Germany with expedited logistics. In urgent cases, we can sometimes expedite parts within 3-5 days to India. Contact our spares team for current availability on your specific component.
Can Synchronics repair PCE thermal cameras with dead pixels in the detector?+
Yes. Synchronics offers both firmware-level pixel correction (via interpolation algorithms) for minor dead pixel issues, and full detector module replacement for severe failures. Uncooled microbolometer detectors used in PCE-TC series often show pixel degradation in high-temperature industrial environments. We re-verify thermal accuracy at multiple reference temperatures and issue updated calibration certificates after repair. This is particularly important for predictive maintenance programmes in Indian power plants and steel mills.
How do I send my PCE unit for repair?+
Pack the unit securely and courier it to our Vadodara workshop. Include a note with the fault description and your contact details. We will log it into our system and WhatsApp you a job number within 24 hours of receipt. Doorstep pickup is available in Vadodara, Ahmedabad, Surat, Mumbai, and Pune.
What is the cost of repairing a PCE drive or PLC?+
Repair cost depends on the model and the fault. We offer a free diagnosis — once we identify the fault, we provide a fixed quotation before proceeding. Typical repairs cost 20–40% of the new unit price. We will never repair without your approval.
What warranty do you provide on PCE repairs?+
All repaired units carry a 6-month comprehensive warranty covering the same fault and related issues. If the fault recurs within the warranty period, we repair it free of cost.
Do you provide a no-fix, no-fee guarantee?+
Yes. If we cannot repair your PCE unit after diagnosis, you pay only the diagnosis fee (₹500–₹1,500 depending on the product). The unit is returned to you at no additional charge.
PCE Repair Catalog
Showing 1–1 of 1 PCE products
Other Brands We Repair in the Same Categories
Get Your Equipment
Back in Action — Fast
Send us your faulty industrial electronics. Our engineers will diagnose it and provide a detailed quote within 24 hours — with no obligation to proceed.
Free Evaluation
No obligation
48hr Turnaround
Fastest in India
6-Month Warranty
Every repair
No Fix, No Charge
Zero risk policy
Pan-India Pickup
Doorstep service